Decorative Flake Flooring Systems

Our flagship system. A seamless, decorative polyaspartic flake floor that resists hot tire pickup, road salt, oil and impact — installed in as little as one day.

GET YOUR FREE QUOTE

Fill out the form below and we’ll get back to you ASAP!

aerial-view-of-sneakers-green-canvas-shoe-with-cas-2026-03-13-01-58-48-utc (1)
top-view-of-beach-covered-in-broken-seashell-fragm-2026-01-09-00-52-53-utc (1)
Overview

Flake Flooring Systems in Columbus, Ohio

Imperial’s flake garage floor is a polyaspartic garage floor system: epoxy flake flooring finished with a UV-stable clear coat that resists stains, chemicals, impacts and daily wear. It is also a strong choice for basements, warehouses, showrooms and commercial spaces.
Every flake flooring systems project starts the same way: we diamond grind the slab back to a clean, open profile, repair any cracks or spalling, and only then begin building the system. That preparation is not glamorous and it is not optional. It is the reason our floors carry a lifetime warranty against peeling.

Best suited to

man-in-sports-sneakers-for-running-standing-on-a-2026-03-20-06-20-48-utc (1) (1) (1) (1) (1)

Why This System Performs

Upgrade your property with premium polyaspartic floor coatings designed for exceptional durability, long-lasting protection, and stunning curb appeal. Our one-day concrete floor coating system is up to four times stronger than traditional epoxy, resists UV yellowing, and features a slip-resistant finish for added safety. Available in a wide selection of custom color blends, our coatings enhance garage floors, basements, patios, pool decks, driveways, and commercial concrete surfaces. Built to withstand heavy traffic, stains, chemicals, impacts, and harsh weather, our floor coating solutions deliver a beautiful, low-maintenance finish that lasts for years.

Installer in work gloves checking a floor surface with a level
Installer working on a flake-coated floor next to a wall
Close-up of a glossy coated floor surface

Flake Flooring Gallery

Gray flake floor coating beside a stainless steel refrigerator and white cabinetsHome hallway with white kitchen cabinets and tile flooring leading to a dining area
Gray flake garage floor with a black border along the wallGray and blue flake garage floor with a seam line across it
Cracked bare concrete floor in a garage before coatingLight gray flake floor coating in a finished room with sunlight across the surface
Gray flake floor with a saw-cut control joint lineClose-up of gray flake floor with a white joint line
Gray flake garage floor beside a workbench and white wallGray flake garage floor with a tool wall and dark baseboard border
Open two-car garage with bare concrete floor and a leaf blower before coatingGarage interior with bare gray concrete floor before coating
Close-up of glossy blue and gray flake garage floorGray flake floor with a black control joint strip
Questions

Flake Flooring Systems Questions

What customers ask us most about this system.

Flake flooring is a multi-layer resin coating system. A pigmented base coat is applied first, followed by decorative vinyl flakes while the coating is still wet. Once cured, the excess flakes are removed, and the surface is sealed with a clear polyaspartic topcoat. The result is a seamless, textured, and slip-resistant floor that is both durable and attractive.

Most residential garages up to a two-car size can be completed in just one day. Larger commercial spaces or floors requiring significant crack or pitting repairs may take up to two days to complete.

Light foot traffic is typically allowed after approximately 4 to 6 hours. Vehicles should remain off the floor for 24 to 72 hours, depending on the temperature and humidity during installation.

No. The decorative flake system creates a subtle textured surface that provides excellent traction. For pool decks or commercial entryways, an additional anti-slip aggregate can be added to the topcoat at no extra cost for enhanced safety.

No. Peeling is usually caused by poor surface preparation rather than the coating itself. Every floor is professionally diamond-ground to properly prepare the concrete and create a strong mechanical bond before the coating is applied. This critical preparation step is often skipped by hardware store epoxy kits, which is why they are more likely to fail.

Price depends on the square footage, the condition of the existing slab, and the system you choose. Imperial gives free estimates and quotes a firm fixed price after inspecting the floor, and will beat or match any written quote from a reputable company.

An epoxy or polyurea basecoat bonds strongly to properly prepared concrete and forms the foundation of the floor. Polyaspartic is a UV-stable clear coat applied over the decorative flake to protect the color and surface. Imperial's flake systems combine both.

Imperial offers 16 standard flake blends, from neutral greys and tans to bold blues and high-contrast black and white, plus custom colors, patterns, and textures. You can preview the blends on the Coating Colors page, and Imperial brings physical samples to your free estimate.

Every finish is sealed with a UV-stable clear coat that keeps colors from fading, and the seamless, non-porous surface resists oil, chemicals, and stains. Clean spills promptly and maintain the floor as directed.

Sweep or dust-mop loose debris, then clean with water and a mild cleaner appropriate for coated floors. Avoid harsh tools that can scratch the surface.

Yes. Residential coating systems carry a lifetime warranty against peeling and delamination. Imperial is also licensed and insured.

Other Systems

Compare Our Other Coatings

Preparation is the difference between a coating that lasts twenty years and one that lifts in two winters. We never skip a stage.

Quartz Flooring Systems

Heavy duty slip resistant quartz

Grind and Seal Concrete

Cost effective sealed concrete

Polished Concrete

High gloss mechanically polished slabs

Available across Central Ohio: Columbus, Canal Winchester, Dublin,
Westerville, Pickerington, Reynoldsburg, Grove City, Hilliard, New Albany, Gahanna.