Most Columbus homeowners ask about cost first, and the honest answer is that it depends on the floor. This guide explains what moves the price of an epoxy or polyaspartic flake garage floor, what typical ranges look like, and how to compare quotes fairly.

Key takeaways
- National guides put professionally installed epoxy at about $4–$10 per square foot and polyaspartic at about $5–$12.
- Concrete condition, system choice and flake finish move the price more than anything else.
- Diamond grinding is part of the price. Skipping it is the usual reason coatings peel.
- A firm price needs an inspection. Request a free quote.
Typical price ranges
National cost guides such as HomeGuide put professionally installed epoxy at roughly $4 to $10 per square foot and polyaspartic at roughly $5 to $12. These are national averages, not Columbus quotes, so treat them as a starting point. Imperial quotes a firm price after inspecting your floor.
| System | Per square foot | Two-car garage |
|---|---|---|
| Epoxy | $4–$10 | about $1,600–$5,800 |
| Polyaspartic | $5–$12 | about $2,000–$6,900 |
What changes the price
- Square footage. A one-car garage, a two-car garage and a three-car garage with a workshop are very different jobs.
- Condition of the concrete. Cracks, pitting, oil stains, old paint or a failed DIY kit add repair and grinding time.
- The system. A decorative flake system with a polyaspartic clear coat costs more than a basic solid-color coat.
- Flake blend and finish. Full-broadcast flake, custom blends and added traction cost more. Browse the coating colors.
- Extras. Coved edges, steps and thresholds are priced separately.
- Moisture. Concrete that holds moisture may need testing and a moisture-tolerant primer.

Why preparation is part of the price
Peeling coatings usually trace back to poor preparation rather than the product. Imperial diamond-grinds every floor, repairs cracks and damaged areas, and only then builds the coating system. See each step on our process page. A low quote that skips grinding often costs more in the end, because the coating lifts and has to be removed and redone.
How to compare quotes
- Ask whether the price includes diamond grinding, crack repair and the clear coat.
- Ask which basecoat and topcoat are used, and how many layers.
- Ask what the warranty covers in writing. Imperial’s residential systems carry a lifetime warranty against peeling and delamination.
- Ask how long the job takes. Most residential garages up to two cars can be completed in one day.
- Confirm the crew is licensed and insured, and check customer reviews.
Other floors we coat

Frequently asked questions
How much does a two-car garage floor coating cost?
National guides put it at roughly $1,600 to $6,900 depending on the system and the condition of the slab. A firm Columbus price needs an inspection.
Is polyaspartic more expensive than epoxy?
Usually yes per square foot. Read the full comparison: epoxy vs polyaspartic.
Does the price include repairs?
Minor crack repair is normally part of preparation. Heavy pitting, spalling or moisture problems can add cost, so ask for repairs to be itemized.
Get a firm price for your garage
Imperial quotes a fixed price after inspecting the floor.
Serving Columbus, Dublin, Westerville, Pickerington, Reynoldsburg and Canal Winchester